Type of trucks
They are used for fast-moving or light-weight cargo transport:
– have a loading capacity of approx. 1.5t;
– loading is done in the rear, in the case of vans or rear and side, in the case of tarpaulin vehicles;
– approximately 10m3 – 25m3 volume;
They have different characteristics depending on the truck manufacturer, often used for the transport of furniture, textiles, etc.
– loading is only through the back;
– Load capacity up to 22t;
– approximate dimensions 13.6 x 2.4 x 2.65 (L x l x h);
– Load volume of approximately 90m3;
Jumbo trucks with tilt are different from other types of trucks through the so-called „swan neck”, lower in the center and higher at the ends. The lowered floor can allow the loading of high loads over 3m in the center and 2.4m in the front.
– load capacity of approximately 21t;
– dimensions of 13.6 x 2.45 x 3 (L x L x h);
– the scene has a height of 2.55m;
– Load volume of 95m3;
These are trucks used for the transport of massive cargo.
– the truck can be loaded on the top, through the sides or behind, depending on the type of tilt;
– they have a loading capacity of up to 22 t;
– approximate dimensions of 13.6 x 2.45 x 2.9 (L x l x h);
– at some trucks with tilt, the height can also reach 3.1m;
– the volume can be between 96m3 and 100m3;
They are used both for grouping medium delivery times and for full load. They have different loading types and capacity, depending on size.
20-22 tons trucks with titls are the usual means of transporting standard goods, often found on all transport routes.
With a semitrailer length of 13.60 m, a width of 2.45 m and a tilt height of 2.60-2.70 m and an average volume of about 86-89 cubic meters, this type of trucks can load 20- 22 tons of merchandise.
Standard trucks of 20-22 tons can serve your transport needs both for groupage and full transport to and from any destination.
Refrigerated trucks are used in transporting products that require a controlled temperature or have a high degree of perishability. We provide transport with refrigeration or Thermoking equipped with temperature controlled units.
– trucks with dimensions of 6 x 2.4 x 2.4 (L x L x h). Load capacity 3.5t;
– trucks with dimensions of 13.6 x 2.4 x 2.7 (L x L x h). Load capacity of 23t;
– Temperature controlled trucks: can maintain an indoor temperature between -20C and +12C;
– Refrigerated trucks: allow lowering the temperature inside and maintaining it constant;
– trucks with heat generation systems: allow to increase the indoor temperature up to + 12C and maintain it;
When the freight goods exceed the standard dimensions of a 20 tons truck, the transportation is considered as overweight. The weight of goods that can be transported on trailers or oversized platforms varies depending on the number of axles of the trailer.
There are several types on oversized trailers:
– low-bed: with the floor near the ground (also called „swan neck”);
– extensible trailers for width or height;
– long trailers depending on the number of axles;
